Archive

With its amazing functions and features, the iPhone has transformed how we work and communicate today. However, a common challenge many iPhone users face is problems with its battery life. If you’re experiencing an unusually fast drain of your iPhone battery, you’re not alone. In this blog, we shall learn about the iPhone battery life – from recognizing issues to checking performance to prolonging battery life. Let’s dig in!

What Is The Average iPhone Battery Life?

The average iPhone battery lasts 10 to 17 hours after a full charge. Various factors impact the battery life, like – screen brightness, unnecessary application usage, and network connectivity. Remember that the battery life varies according to newer technology advancements and hardware optimization. The newer iPhones have better battery performance than the older ones. They tend to have more efficient processors that provide better power management.

Regardless of the progress in battery technology, there is only a finite number of times your phone can complete the charging process. Your battery can complete 400-500 full charges. After that, you will only get 80% of the charge when your phone is brand new.

How To Know When Your iPhone Battery Is Not Working Efficiently?

Here are some signs that indicate that your iPhone battery is not working efficiently–

• Rapid Battery Drain: If your battery decreases abnormally faster with even little usage, there might be issues with your battery. While batteries degrade and age with time, a sudden drop in battery life signals that your battery is not working efficiently.

• Unexpected Shutdowns: Your battery may have issues if your phone shuts down out of nowhere, even with some charge remaining. If your phone shuts down frequently, your battery struggles to deliver stable and consistent power.

• Excessive Charging Times: If your iPhone takes considerable time to charge fully, your battery may have degraded. While it may take a long time to charge, your phone won’t be able to retain it properly if the battery is weak.

• Device Overheating: If your iPhone generates excessive heat during usage and charging, it indicates a battery inefficiency. While it is normal for your phone to warm up slightly during intensive tasks, it’s not normal to overheat during minimal use.

Where To Check Battery Performance In iPhone Device?

Follow these steps to check the battery performance on your iPhone–

• Go to “Settings” and click “Battery.”
• Then tap battery health and charging.
• Your phone displays “Maximum Capacity” and “Peak Performance.”

Note: “Maximum Capacity” shows the current health of your battery.

“Peak Performance” shows the battery capacity compared to when it was new.

Here are some important messages not to ignore when checking your iPhone’s battery health:

• “Your battery’s health is significantly degraded…”
• “Unable to verify this iPhone…”
• “…unable to determine battery health…”

These messages mean that the battery of your iPhone only has 80% or below capacity to hold off the charge, and it needs replacement ASAP!

9 Tips To Extend iPhone Battery Life

Here are some tips on how you can prolong your iPhone’s battery life–

Tip 1: Enable Low Power Mode

The low-power mode optimizes your battery by limiting background application usage, like automatic downloads and email fetching. It also temporarily reduces performance and can extend the battery when running low. To enable this feature, go to:

Settings > Battery > Low Power Mode

Tip 2: Manage Background App Refresh

The background app refresh feature helps prevent background apps from consuming the battery. This feature is great for toning down background activity on rarely used apps. You can access this feature by going to:

Settings > General > Background App Refresh

Tip 3: Minimize Push Notifications And Fetch Settings

Your battery will drain if you receive push notifications for all your apps. You can extend your phone’s battery by reducing notifications for non-essential apps. Similarly, you can save battery by managing the fetch settings on your email accounts. Your phone will reduce the frequency of checking for new emails. Remember, by configuring the fetch settings, you can only see a new email when you open the email app.

Tip 4: Reduce Screen Timeout

With a shorter screen timeout, you can save your iPhone’s battery to a certain extent. To reduce your screen’s timeout, go to:

Settings > Display & Brightness > Auto-lock

Then, choose a shorter interval, ideally 30 seconds to 1 minute.

Tip 5: Disable Unnecessary Location Services

Enabling location services when not in use can cause a significant drop in the battery by relying on GPS and other sensors. To turn off the location services for apps that don’t require it, go to:

Settings > Privacy > Location Services

Tip 6: Limit Background App Activity

Even when not in use, certain apps keep running in the background and consume your battery. Disable the background app refresh feature for apps without constant updates. You can also limit background activity by closing unused apps from the app switcher.

Tip 7: Turn off WIFI, Bluetooth, And Airdrop When You’re Not Using It!

If you are used to leaving your wifi, Bluetooth, or airdrop on, your battery will run out quickly. It will cause you to charge your phone repeatedly, which could degrade your battery’s performance over time.

Tip 8: Optimize Battery Usage In Settings

The “Optimized Battery Charging” feature is available on all iPhones running iOS 13 or versions later than that. This feature reduces the time your iPhone spends charged to 100% and helps minimize battery aging. To enable this optimized battery charging, go to:

Settings > Battery > Battery Health

Tip 9: Adjust Screen Brightness

Do you like to set the brightness of your phone to the maximum? Well, it’s one of the innocent ways you’re draining your iPhone’s battery power. To make changes to the brightness levels, do it manually or go to:

Settings > Display & Brightness > Auto-brightness

What To Do If Your iPhone Battery Stops Working?

If your iPhone battery stops working, use these tips–

Tip 1: Try Restarting Your Device

Turn off your phone first if it still has a 5% battery but won’t turn on or charge. Then, turn it back on after a minute. Finally, charge your phone for at least thirty minutes to check if it starts working properly!

Tip 2: Inspect Your USB Cable and Charger

If your phone fails to charge after the restart, carefully inspect your USB charger and cable. Stop using the charger immediately if you notice signs of damage, like bent or frayed wire or bent prongs. You will need to replace the charger.

Tip 3: Update Your iOS

Not updating your iOS can also lead to battery problems on your phone. You can check for updates go to:

Settings > General > Software Update

Then install the recent software update if available. After the update, try charging your phone again for half an hour.

Tip 4: Conduct A Factory Reset

If none of the tips above work, you might have to perform a factory reset on your phone. Before doing so, backup your phone data, as the reset will delete everything. This reset will return all your settings to factory default. If your phone works, you will have to readjust your preferences.

Contact 911 Phone Repair For Any iPhone Battery- Related Issues

If nothing works, let us help. Don’t hesitate to contact us at 911 phone repair if your iPhone exhibits any battery-related symptoms. We can assure you of receiving top-notch service because we have been fixing Apple goods for more than three decades. We offer OEM (Original Equipment Manufacturer) batteries and their replacement to ensure you maintain quality. Ready to bid farewell to your iPhone’s battery problems? Contact us today and get a free consultation and price quote!

Conclusion

Overall, being aware of these nine tips can help you extend the battery life of your iPhone. Moreover, your daily life will be less disruptive as your phone will serve you well throughout your day. Every small step can help make a huge difference, from using low-power mode to turning off unnecessary functions. Remember to use these smart battery-saving habits to maximize your iPhone’s battery life!

Related Read: iPhone Battery Replacement: A Complete Guide

Malicious hackers are always looking to exploit smartphones to access private user information and expose sensitive data. Every smartphone user must take strong security measures to keep their device secure and free from threats. You, as users, must remain knowledgeable and proactive in protecting your devices because hackers constantly change their strategies. We, 911 Phone Repair, have listed some tips to keep your smartphone secure and free from hackers. It will significantly help to lower your chance of becoming a cyberattack victim!

How To Identify Suspicious Activities On Your Smartphone?

The security of smartphones is now of utmost importance, especially when they have become such a huge part of our lives. The following scenarios should alert you and cause you to worry about your phone’s security–

• Unexplained Account Activities

Unusual login attempts, account settings changes, or using unfamiliar devices to access accounts connected to your smartphone could all indicate a possible security breach.

• Frequent App Crashes or Errors

While sporadic app crashes are common, persistent app problems may indicate malware interference or security issues.

• Unrequested Password Resets

If you get emails or notifications about password resets for accounts you didn’t request, someone might be trying to access your account without your permission.

• Unexpected Financial Transactions

Unauthorized purchases or transactions from your linked accounts or payment apps may indicate a security breach.

• Unfamiliar Contacts and Messages

Receiving messages from people you don’t recognize or finding unknown contacts in your messaging apps could point to a privacy breach.

• Excessive Spam and Phishing Attempts

Your smartphone may be at risk of security breaches if you receive more spam or phishing attempts.

• Security Software Is Unresponsive

If your antivirus or security software suddenly stops working or updating, it may be a sign of an attack.

• Unusual Network Activity

Continuous background data transfers or shady network connections may be signs of security breaches.

When Should You Start Worrying About Your Phone Security?

Your smartphone’s security should always come first when using it. You should be concerned about the security of your phone in the following circumstances–

• Immediately After Purchase – You must take proactive measures to strengthen the security of your new smartphone as soon as you buy it. Enable Find My Phone or similar tracking services, set up a strong passcode or biometric authentication, and install reliable security software.

• After Downloading Applications – As mentioned in the above section, if you observe any odd behavior after installing an app. You must remove it immediately as it gives access to your data on your phone. Always be cautious when downloading applications from unofficial websites.

• In The Aftermath Of Theft Or Loss – Having your smartphone stolen or lost is a serious situation. To stop unauthorized access to your data, take prompt action to remotely lock, track, or erase your device.

• After You Click Suspicious Links – Clicking suspicious links by accident, especially those found in emails or text messages, puts your device at risk of malware. Check your device for potential threats if this occurs.

• After Connecting To Public WiFi – Public WiFi networks can expose your smartphone to cyberattacks after connecting to insecure networks. Never access confidential data on unprotected networks.

• When Your Accounts Are Compromised – Hackers got you if you receive notifications of suspicious activities on your accounts from unknown sources! Change your passwords right away, and check the security of your phone.

9 Tips To Keep Your Smartphone Secure For Both Android And iPhone Users

Nowadays, cybercriminals frequently target smartphones. Why? Because they contain personal data from bank details to passwords on your social media. It has everything. To protect your privacy and data on your smartphone, you should be able to spot any suspicious activity.

Here are some tips to help you secure your smartphones–

1. Use Strong And Unique Passwords/PINS

Protect your accounts and data from unauthorized sources by creating strong (one-of-a-kind) passwords or PINs. Never use easily accessible details like names, dates of birth, or common words. Instead, go through the following advice–

• Avoid patterns that are simple to predict, such as “123456” or “password.” Hackers frequently use such usual combinations to crack passwords quickly.
• Ensure your passwords or PINs are 12 characters long and contain various uppercase, lowercase, digits, and special characters.
• Avoid reusing passwords for every account. To avoid a chain reaction, another should have a different password if one account gets compromised. This way, all your funds are safe and secure.
• Consider using a trustworthy password manager to create and securely store your passwords. You can manage and automatically fill out passwords with these tools, making it simpler to stick to best practices.

2. Do Not Share Your OTP With Anyone Else 

OTPs (one-time passwords) add extra security to your accounts. Your registered email address or mobile number receives OTPs for verification. To keep OTPs working effectively:

• Never provide your OTPs to anyone, not even those who pose as representatives of reliable organizations.
• Do not send or receive OTPs via email, social media, or messaging apps. Genuine businesses would never request OTPs via these channels.
• Use OTPs immediately after receiving them. To increase security, OTPs typically have a short validity period of a few minutes.

3. Update Your Apps From Verified Sources

Updating your apps is crucial for your device’s security and overall usability. And only download apps from legitimate, official app stores, like the Apple App or Google Play Store. Additionally, make sure your apps are updated automatically or manually regularly. Updates released by developers fix security flaws and enhance functionality.

4. Enable Two-Factor Authentication (2FA)

One of the basic ways to layer your account with additional security is –Two-Factor Authentication! So when you enable it, logging in to your account requires a secondary code verification and password. Hence, to activate 2FA, check to see if your services support two-factor authentication. Most social media sites, email services, and financial institutions help it.

5. Be Wary Of Downloading Apps From Unknown Sources

Apps from unreliable sources may put your device at risk for security breaches. Take these safety measures to prevent such activities–

• Review the permissions that any app requests before installing it. Consider only installing the app if they seem reasonable for its capabilities.
• Avoid sideloading apps from unknown sources, such as third-party app stores or websites, as they contain malicious software.

6. Use Secure WIFI Connections

When accessing the internet remotely, many WiFi users use open networks rather than the data plans associated with their devices. However, there are risks associated with using public WiFi. If careless, hackers could easily access your connection and compromise sensitive data stored on your device and online accounts.

7. Do Not Click On Phishing Links Or Unidentified URLs

Phishing attempts trick users into disclosing personal information. So always be wary of emails, messages, or links from people you don’t know. Also, do not click dubious links. Before clicking on any URLs, carefully inspect them by looking at ‘https’ or ‘http’ in an URL. The links that do not have https are not secure or trustworthy!

8. Regularly Back Up Your Data

When hackers get into your phone, there is a high chance that you will lose all your details and information. That’s why regularly backing up is important. Your data can get recovered if you back up data in a secure location, like on an external hard drive or encrypted cloud storage. Remember to schedule regular automatic device backups or perform manual backups at least once weekly.

9. Use Your Phone Security Options Such As Screen Time Outs And Lock Screens In All Apps

Adding security features to your smartphone provides additional defense against unauthorized access. You can lock your phone automatically when not in use by setting a brief screen timeout duration. For instance, secure your device using biometric options like fingerprint or facial recognition or PINs, patterns, passwords, or lock screens.

Conclusion

Always keep your device’s software up to date and use secure passwords unique to you. Be cautious when downloading apps, and look for shady links and messages. Keep one regularly backing up data for additional security against loss or theft. By incorporating these security practices into your daily smartphone routine, you can take full advantage of your smartphone while reducing potential risks and ensuring a safer online experience.

For any smartphone repair, security software updates and damage requirements, 911 phone repair provides all necessary services within the Oklahoma area. Contact us today!

Is your iPhone more sluggish than when you purchased it? Go to Settings > Battery > Battery Health > Peak Performance Capability. Do you see any battery warnings? If it says your battery health is significantly degrading, then it means your iPhone needs a battery replacement. 911 Phone Repair is here at your rescue with the complete iPhone Battery Replacement guide!

Let’s begin.

🛠️Skill	Intermediate
💰Cost (Tools + Battery + Other Components)	iPhone 14 series: $99 iPhone 13 to iPhone X: $89
⏳Time	30 min to 1:30 hour

Apple’s iPhone Battery Features And Its Performance 

Did you know the capacity of your iPhone’s battery dips down to 80% within 18 to 24 months of its purchase? It means your battery will be full but can only hold 80% of its original capacity. Of course, it doesn’t happen until the 500 charging cycles. However, besides the charging cycle, there are a lot of other things that cause battery issues.

But first, let’s understand various Apple iPhone battery features–

a. Batteries With Lithium-Ion

iPhones have lithium-ion batteries. Due to this reason, it charges faster, last longer, and has a higher power density. However, these batteries chemically age, meaning their ‘Peak Power Performance’ decreases over time for various reasons.

b. Fast Charging Capability

Isn’t it great that iPhone batteries can fast charge up to 50% within 30 minutes? However, the catch is you will need designated Apple iPhone adapters. For instance, Apple USB-C (18W2, 20W, 29W, 30W, etc.) Power Adapter. You can also use a third-party USB-C power adapter that supports USB Power Delivery (USB-PD).

c. Optimized Battery Charging For iOS 13 And Later Phones!

iPhone with iOS 13 or later has a feature called ‘Optimized Battery Charging.’ The on-device machine learning learns your daily charging routine and helps to slow down the rate of battery aging by reducing the time your iPhone spends fully charged. Basically, it learns your daily charging routine and charges your device to 80%, further holding off there until you decide to charge the remaining 20% battery.

Note: Usually, Optimized Battery Charging turns on by default with the iOS 13 or later upgrades, but if you want to know where this feature is– Go to Settings > Battery > Battery Health & Charging (Turn it off or on!)

d. Battery Health Meter (i.e., Maximum Capacity)

For iPhone 6 and, later, iOS 11.3 and later, there’s a feature called ‘Battery Health.’ It shows the maximum capacity of the battery in comparison to when it was new or was at 100%. With this feature, you can navigate the current state of your iPhone’s battery.

e. Wireless Charging

Apple also has Qi-certified wireless charges for the iPhone. These are externally added battery-related features as it helps users to charge their iPhone by magnetic induction without having to plug into a power socket.

Almost all of the latest iPhones have these fundamental features, which help deliver maximum battery power.

Factors Affecting iPhone Battery Performance 

Here are some factors affecting iPhone battery performance–

a. Temperature Fluctuations

The iPhone functions best at 32°F to 95°F; if there are temperature fluctuations above or below this range, then it will cause the battery to drain faster. On top of that, temperature fluctuations can also cause battery damage over time.

b. Battery Age

A phone’s battery is always limited to specific charging cycles. Once it hits its ultimate cycle, its performance starts to decrease. Apple recommends replacing the battery after reaching 80% capacity, i.e., after you’ve charged your iPhone over 300 to 500 cycles. It’s an unavoidable factor that affects the iPhone;s battery performance.

c. Your Charging Habits!

How and when you charge your iPhone, 100% affects battery performance! Do you overcharge your iPhone using low-quality chargers? – You are practically lowering the battery life of your iPhone through your habits. It’s always necessary to use Apple-approved charges and follow proper charging habits like disconnecting once your device gets fully charged!

d. iOS Updates

iOS updates help improve your iPhone’s battery life by optimizing performance and addressing battery-draining bugs. However, they also introduce new features that consume more power, decreasing battery life. So, iOS updates are like a double-edged sword to your iPhone’s battery.

e. Power-Hungry Apps!

We are talking about the background apps like GPS navigation that runs without you knowing and apps that need maximum brightness like Games or video streaming. Due to apps like these, your iPhone’s battery drains more quickly, which causes you to charge your phone more often.

How To Identify When Your iPhone Battery Is Not Performing Efficiently?

Here are a few signs that scream that your iPhone’s battery is not performing efficiently, and you must replace it ASAP!

• Your iPhone switches off often even though your battery is at 50%.

• There are lower frame rates while scrolling or launching an app. Meaning that your iPhone is unusually sluggish. You can figure this out by going to Settings > Battery > Battery Health > Peak Performance capability. And if you see Battery Health Unknown, your iPhone needs a battery replacement. You will most likely see this message–“Your battery’s health is significantly degraded….”

• Its battery life doesn’t last long. You need to charge more often.

• You can only use your iPhone when you plug in to charge.

• Does your iPhone overheat a lot? – Yup, that’s a battery problem!

• You notice bowing or case separation in the side of your iPhone, or even a white screen, screen crack, or feeling squishy while pressing on your screen. These signs say that your battery has swollen. And it needs a professional inspection immediately.

Step-By-Step Process To Replace An iPhone Battery

Now that you know the signs, let’s proceed with the iPhone battery replacement process. But before that, get these tools ready–

• P2 Pentalobe screwdriver
• Phillips #000 screwdriver
• Nylon spudger
• A suction cup
• Tweezers
• A fresh iPhone battery (compatible with your specific iPhone model)

Step 1: Opening The iPhone Case

• You need to turn off your iPhone and remove the SIM card tray.
• Now, remove the Pentalobe screws at the bottom of the device near the charging port.
• Place the suction cup on the iPhone’s screen and slowly pull it up to create a gap between the screen and the rear case.
• Insert the spudger into the gap and carefully pry open the display.

Caution: Do not damage the cables connecting the screen to the mainboard.

Step 2: Disconnecting The Battery From The Device

• Remove the screws securing the metal plate that covers the battery connector.
• Using the nylon spudger, disconnect the battery connector from the mainboard.

Step 3: Installing The New Battery Securely

• Carefully remove the old battery by gently prying it out of the device with the spudger.
• Insert the new battery into the iPhone and make sure that the connector aligns properly with the mainboard.
• Reconnect the battery connector.

Step 4: Re-assembly And Testing

• Replace the metal plate over the battery connector and secure it with screws.
• Align the display to the rear case, and see if all connectors are correctly seated.
• Apply gentle pressure around the edges to seal the device.
• Replace the Pentalobe screws at the bottom of the device.
• Turn on your iPhone and test the new battery.

Do You Need To Go To An Apple Authorized Battery Reseller For Genuine Replacement Batteries?

If you don’t want to avoid getting counterfeit batteries without genuine Apple battery performance, you need to go to an Apple-authorized battery reseller.

An Apple Authorized Battery Reseller will provide you with these advantages–

• Genuine Apple Batteries: Authorized resellers only use genuine Apple batteries, ensuring safety and optimal performance.
• Expert Installation: Certified technicians follow Apple’s guidelines and have the necessary tools to replace your battery without causing any damage to your device.
• Warranty Protection: Repairs performed by Apple Authorized providers do not void your device’s warranty and, in some cases, may even extend it.

Best iPhone Battery Vendors With Quality Replacement Batteries

Before we dive into the best vendors, let’s first discuss the crucial factors to consider when selecting an iPhone battery vendor:

1. Compatibility – Ensure the battery is compatible with your iPhone model.
2. Quality – Look for batteries that meet or exceed OEM (Original Equipment Manufacturer) specifications.
3. Warranty – A good vendor should offer a warranty to back their product.
4. Customer Reviews – Check for positive customer reviews and testimonials.

Here are the top iPhone battery vendors offering quality replacement batteries.

iPhone Battery Vendors	About Their Quality Replacement Batteries
iFixit	Meet or exceed OEM specifications Come with a one-year warranty Include necessary tools and adhesive for easy installation
eTech Parts Plus	OEM-grade batteries for a variety of iPhone models A 365-day warranty Fast shipping and customer support
NewerTech	Extended battery life compared to the original battery Compatibility with a wide range of iPhone models A one-year warranty

5 Tips On Maximizing iPhone Battery Life

Here are quick tips on maximizing iPhone battery life–

Tip 1: Enable Low Power Mode

• Make your battery last longer by not charging it frequently.
• To enable ‘Low Power Mode,’ go to Settings and click on Battery.

Tip 2: Optimize Wi-Fi and Cellular Connectivity

• When Wi-Fi is unavailable, turn off Wi-Fi to avoid constant scanning for networks.
• Turn off Cellular Data when Wi-Fi is available to preserve battery life.

Tip 3: Disable Push Notifications For Less Important Apps

• Go to Settings > Notifications and customize notifications for each app.

Tip 4: Reduce Screen Timeout Duration

• Adjust screen timeout settings by going to Settings > Display & Brightness > Auto-Lock.

Tip 5: Turn Off The Vibrate Function

• Vibration consumes battery power, so turn it off when not needed.
• Go to Settings > Sounds & Haptics, toggle off Vibrate on Ring, and make it Vibrate on Silent.

Contact 911 Phone Repair For Professional iPhone Battery Replacement In Oklahoma

At 911 Phone Repair, we understand the importance of a healthy iPhone battery. Our certified technicians are here in OK to assist you with iPhone battery replacement. Here’s why you should choose us:

• OEM-Quality Batteries
• Quick and Efficient Service
• Competitive Prices
• 90-Day Warranty

Contact us in Oklahoma today!

Conclusion

So, is it easy to replace a battery? – We are not saying you should replace the iPhone’s batteries on your own. We just hope you know what goes through its replacement process. But if you want to give it a try with the DIY iPhone battery replacement, then good luck! If things go south, remember 911 Phone Repair. We are here to help you with any iPhone battery-related issues!

From serving as a communication portal to providing entertainment, our phones have become integral to our lives today. However, mishaps and damages are inevitable when you own a phone. Especially water-related accidents – be it dropping it into toilets, pools, or sinks. You’re not alone if you’re searching for ways to repair a water-damaged phone. This blog will shed light on salvaging your precious device from water damage.

First Step Is First: Assess The Water Damage To Your Phone

The most important step before repair is evaluating how severe the damage is. When assessing the damage, ensure that you determine the following information–

• How long was the phone immersed in the water?
• The type of water it got immersed in (tap water, salt water, chlorine water).
• Whether you turned on or off the phone during exposure to water.
• Whether the water has accumulated inside the phone (like under the screen).

When assessing your phone’s water damage, it is important to remember that you might encounter certain limitations. Moreover, you may need the right knowledge and proper tools to deal with such damages. That’s why seeking professional help for water-damaged phones is the best option.

What Are The Signs Of Water Damage To Your Phone?

Detecting the signs of water damage early can help you take quick action in salvaging your phone. Here are some common signs that indicate that your phone has water damage–

• The screen flickers displays unusual colors or does not respond to touch
• The battery drains faster than usual or fails to hold the charge properly
• Your phone’s speakers generate distorted or muffled sounds
• Your phone heats up quickly
• You encounter frequent glitches or freezes when using your phone
• Your phone’s internal parts, like the circuit board and battery, are covered in rust
• Distorted edges or buttons on the phone
• Your phone doesn’t function at all

How To Dry A Water-Damaged Phone?

Follow these steps to dry a water-damaged phone thoroughly–

• First, turn off your phone
• Dry it gently using a soft and absorbing cloth
• With the lighting port facing downwards, tap your phone gently to let excess water out
• Put your phone in a well-ventilated room for 5 hours, then turn it back on

Try these steps if the previous one didn’t work!–

• Switch off your phone after removing it from the water
• Use an absorbing cloth to dry your phone’s exterior
• Put your phone inside a large container
• Fill the container with the silica gel beads and seal it
• Let your phone dry in the container for about 72 hours
• Take out your phone after that and try switching it on

Things To Avoid When Drying Your Phone Damaged From Water

It is important to be cautious while attempting to dry your water-damaged phone. Avoid the following things in the drying process–

• Using Heat: Do not use hair dryers and microwave ovens to dry the phone. These appliances produce excessive heat and will damage sensitive internal parts like the battery and circuit board.
• Shaking The Phone: Do not violently shake your phone to remove water. Doing so can push the water further inside the device.
• Continuously Pressing Buttons: Do not press repeatedly in an attempt to turn on the phone. Doing so can lead to further damage, like short circuits.
• Charging The Phone: Wait until you’re completely sure it is dry. Charging a wet phone has various consequences, like a damaged charging port and short circuits.
• Rushing The Drying Process: Do not ignore the drying time. Rushing the drying process may cause irreversible damage to your phone.

Steps To Repair A Water-Damaged Phone 

After successfully drying your phone, follow these steps to repair your water-damaged phone–

Step 1: Disassemble Your Phone

Carefully disassemble your phone parts like the battery, sim card, and other removable components. It is important to be extra cautious while taking apart your phone so that you don’t cause further damage to the phone parts.

Step 2: Absorb Excess Moisture From The Phone

After removing the phone components, pat them dry with a soft, absorbent cloth. Be gentle and focus on drying out the nooks, ports, and buttons. There might still be some water that got trapped in these places.

Step 3: Clean The Phone

Use isopropyl alcohol and a soft brush to remove any residue and mineral deposits left from the water exposure. Ensure that the alcohol has a concentration of at least 90% for the cleaning to be effective.

Step 4: Allow Sufficient Drying Time

Let your phone dry in a bag of silica gel packets. While checking if your phone has started working can be tempting, allowing it to dry completely is important. You must wait at least 24 to 48 hours before reassembling your phone.

Step 5: Reassemble Your Phone

After waiting at least a day or two, carefully reassemble your phone. Ensure that all the parts are secure and properly placed.

Step 6: Test Your Phone

Charge your phone and try turning it on. Remember to check all its functions, like display, sound, camera, and connectivity.

Signs That You Need Professional Help To Fix Your Water-Damaged Phone

You still need to fix your phone even after following the above steps. The issues that arise from water damage are unpredictable. Hence, prepare yourself for any potential issues. Here are some common signs that indicate you need professional help to fix your water-damaged phone–

• Battery Damage: First, you must assess your phone’s battery damage. If your battery is removable, shut down your phone and take out the battery from the back. While evaluating the battery, look for a white patch and a red pattern. The water did not get into the battery if the colors and design were intact. However, if you come across pink traces, it means that the presence of moisture led to the red and white colors mixing.

Note: If your phone has an inbuilt battery, you might have to contact a professional to avoid damage to the phone components.

• Damaged Ports: Another sign you may require professional repair is if your phone ports are damaged. To assess damages, check all the openings on your phone, including the charging port, headphone jack, and memory card slot. Look out for rust, corrosion, or wiggling when you plug it in. If you come across these signs, your phone likely needs professional repair.

• Distorted Edges And Buttons: If you come across any warping signs or distorted edges on your phone, you might need to access professional repair as soon as possible. When you turn it on, you may also experience a bleeding display on your phone screen.

• Moisture Under The Screen: After taking your phone out from the water, look for visible signs of water or water marks under the screen. If you encounter any, immediately take your phone to a professional phone repair service provider.

• Activated Liquid Contact Indicator: If you own an iPhone, take out the sim card tray and check the slot. If you see a patch of red color, that means your phone has water damage. Remember, when the Liquid Contact Indicator gets activated on your phone, you will see red patches instead of white or silver color.

Contact Expert Phone Repair Services At 911 Phone Repair In Oklahoma

You can count on 911 Phone Repair for unmatched phone repair services if you live in Oklahoma. Our certified technicians are highly experienced in handling water-damaged phones and can help restore them to normal. From diagnosing the damage to repairing it, we give it our all to bring your beloved phone back to life. Call us today to start your phone repair process!

Conclusion

Dealing with water damage on your phone can be upsetting. However, you can improve the possibility of your phone repair with prompt action and the right steps. If you have a water-damaged phone, remember to evaluate the damage properly and follow the instructions in this blog to dry out your phone. If you still are waiting to see expected results or face persistent problems, feel free to seek professional help. With the right support and patience, your damaged phone is salvageable.

Also Read: Phone Repair Estimate: How Much Does Phone Repair Cost?

Smartphones have assimilated into our daily lives in the lightning-fast technological world. No matter how sophisticated these gadgets are, accidents can still happen, and phones can get damaged in many ways. Smartphone users frequently experience the need for phone repairs due to everything from cracked screens and water damage to battery problems and software malfunctions. One of the main concerns you normally face with a broken phone is the price of repairs. We will guide you through the phone repair cost estimate and the factors affecting its total cost.

Common Reasons For Cell Phone Repair

Problems with cell phones can be upsetting and disruptive as they have become an important part of our lives. Some common cell phone issues are as follows–

• Broken Phone Screen

Broken phone screens compromise your device’s visibility, aesthetics, and touch functionality. According to estimates, 50 million smartphone screens break annually in the United States, making it one of the most frequent problems encountered by Android, iPhones, and other mobile device users.

Fortunately, a smartphone’s screen is simple to fix and replace. A smartphone repair specialist can assist you in repairing it quickly. They can help shield it from harm and improve broken screens.

• Battery Not Charging

Smartphones are susceptible to bad battery health issues due to their short battery life. Low battery charge prevents all of the phone’s components from being powered up, which eventually results in the phone shutting down. So, finding a dependable phone repair shop is the best way to handle battery issues or battery replacement.

• Water-Damaged Phone

Is water getting inside your phone? If you don’t remove it as quickly as possible, it can eventually rust internal parts. Home remedies, such as smothering a wet cell phone in rice, only work to dry the surface.

Normally you carry your phone wherever you go. And it makes sense that occasionally your phone might fall into the toilet or sink. Water damage is typically irreparable, but if you use a professional service, you can recover files and other content or even repair the phone if the damage is minor. You can also look into how to repair a water damaged phone to ensure you take the necessary first steps before going to a professional.

• Charging Port Not Working

Of course, you usually need help fixing and replacing charging ports. Your phone’s charging ports are a feature you use more than once and at least once daily.

If the charging cable is not properly connecting to a small metal connector in the USB port, then the following can be the causes of it–

• Blockage of power supply to the device because of dust or debris.
• When your device drops, it can cause hardware damage.
• A home fix is possible if the issue is not hardware-related. You can clean the port with a needle and soft cotton. If possible, center or shape the pin to match the pins on the charger.
• Before trying this hack, use a different data cable and charger to determine if the problem is with the port.

If the issue continues, visit your nearby service center for a qualified cell phone repair.

• Camera Issues & More

Your phone’s camera is precious and captures special moments anywhere, anytime. However, it is quite annoying when the photos come out blurry, distorted, or have other quality issues.

Additionally, you can face issues like software glitches, overheating, unresponsive touchscreens, and speaker/microphone malfunctions requiring professional attention. A permanent solution to this problem is the camera lens replacement.

Average Costs For Different Phone Repair Services

The following table lists the typical prices for various phone repair services, broken down by popular device brands such as Android, Apple, and Google Pixel (Windows) Phones:

Repair Service	Android Phones (Average Cost)	Apple Phones (Average Cost)	Google Pixel Phones (Average Cost)
Phone Screen Repair & Replacement	$100 to $250	$150 to $400	$120 to $300
Battery Replacement & Damage Repair	$50 to $100	$70 to $120	$60 to $110
Water Damage Repair	$70 to $200	$80 to $300	$90 to $250
Charging Port & Other Port Repair	$50 to $120	$60 to $150	$70 to $130
Camera Repair	$60 to $150	$70 to $200	$80 to $180
Network & Connectivity Issues	$40 to $100	$50 to $120	$60 to $110
Software Issues	$30 to $80	$40 to $100	$50 to $90
Hardware Issues	$60 to $150	$70 to $200	$80 to $180
Data Transfer, Recovery & Backup	$40 to $100	$50 to $120	$60 to $110

Note: These prices are just an estimate which can change depending on the operating system (Android/iOS), phone’s model, and type/extent of the damage. The mentioned prices are inclusive of material and labor costs.

Factors Affecting Phone Repair Costs

When deciding whether to use professional repair services, you can plan the budgets and make more informed decisions by being aware of these factors. The following are the main factors influencing phone repair costs–

• Device Type And Brand

The phone’s type and brand significantly impact how much it will cost to repair. The use of high-end materials and cutting-edge technology in high-end flagship phones from well-known brands makes their replacement parts more expensive. Additionally, the cost of repairs may increase if spare parts are difficult to find for uncommon or less popular models.

• Device Age

The phone’s age significantly influences the device’s age and the cost of repairs. Parts for newer devices are typically more expensive because they may still need to be widely available on the market. Older devices can have more reasonably priced spare parts, but their limited supply may increase costs.

• The Repair Service Required

The cost will directly depend on the type of repair service required. For example, a straightforward screen or battery replacement may be less expensive than more involved repairs requiring multiple components or water damage restoration. Additionally, labor costs may change depending on how complicated the repair is.

• Warranty Coverage

The existence of an active warranty can significantly impact the cost of repairs. Certain problems are free or discounted if the warranty still covers the phone. However, breaking your phone in an accident might not cover the repair cost.

• Service Provider Or Repair Shop

The repair cost may also depend on the repair services provider. Independent repair shops, authorized service centers, or brand-specific repair facilities might have higher prices. However, choosing authorized service providers ensures genuine components and trained staff use.

Additional Things To Consider When Repairing A Phone

Some additional factors to consider when fixing a phone are listed below–

• Quality And Warranty For Parts

Always use high-quality replacement parts for the durability and functionality of your phone. And check its warranty and quality before you repair your phone. Your warranty is handy as it covers the repair cost of the damaged parts. If not, the repair cost will be your responsibility.

• Repair Shop Expertise and Professionalism

It’s important to assess the professionalism and expertise of the repair facility and its staff before entrusting them with your phone. Look for well-established companies with a history of reliable repairs and pleased clients. Also, read online testimonials and reviews to learn more about their standing in the neighborhood. It is more likely that a knowledgeable and experienced team will correctly identify and resolve the problems with your phone.

• Verification From The Vendors

Ensure the repair facility is accredited by reputable organizations or authorized by the maker of your phone to ensure reliability and authenticity. Authorized repair facilities provide more dependable service because they can access original parts, the most up-to-date repair methods, and thorough knowledge of your device.

• Cost Comparisons

The price of fixing a phone can vary greatly depending on the model/brand (Apple, Samsung, Oppo, Realme, etc.) of the repair/replacement parts and repair shops. While picking a cost-effective solution is important, you should exercise caution when making extremely low-cost repairs because they might skimp on quality.

Contact 911 Phone Repair For Expert Phone Repair Services In Oklahoma

If you need expert care and attention for your phone, you can connect with 911 Phone Repair in Oklahoma. Our highly trained technicians prioritize quality, professionalism, and client satisfaction. And we work tirelessly to deliver top-notch phone repair services.

911 Phone Repair is aware of the value of your device and the significance of an efficient and trustworthy repair procedure. We only use genuine or certified parts to guarantee your phone’s performance is unaffected after the repair. You can rely on our technicians to deal with various phone issues, from cracked screens and battery replacements to challenging hardware and software issues, thanks to our years of experience and stellar reputation.

You can have confidence in us knowing that a warranty covers our repair services. As an authorized repair facility, we have access to original parts and maintain current knowledge of industry best practices to give your device the best possible care. Contact us today!